Brass Check Valve manufacturer in India

Brass One Way Check Valve and Brass Non-return Valve manufacturer in Mumbai

Manufacturer of Brass Dual Check Valve and Brass Swing Check Valve in India suitable for a max. working Pressure of 3000 psi, 6000 psi and 10000 psi

Renowned Brass Check Valve manufacturers guarantee the best quality and price for the products, which has a wide range of applications. The temperature rating of the Brass Instrumentation Check Valve can go up to 400 degrees C, and they usually have a pressure rating of 6000 psi. The brass check valve has great impact resistance and it is generally installed close to the floor, next to the pump

The IS 319 Grade 1 Brass 3000 Psi Check Valve can be used for applying pressure up to 3000 psi, and they have good strength with high corrosion resistance. The IS 319 Grade 2 Brass 6000 Psi Check Valve is non-pressurized and they come with an O-ring seal which is secured positively. The BS 2874 Cz121 Inline Check Valves use a check mechanism that functions in the fluid line of the piping system. The BS 2872 Cz121 Non Return Check Valves help to prevent backflow, promoting the flow to run freely in one way. The 1 Inch and 3 Inch Brass Spring Check Valves are one of the most versatile devices which play an important role in various piping and process systems. The Brass Double Check Valve helps to regulate the flow, start/stop the flow, and prevent the occurrence of any backflow within the given system.

The Swing Check Valve Suppliers offer swing check valves that come mounted on a disc and swing on a hinge or a shaft. The Brass One Way Check Valve is widely used in applications like drinking water and wastewater, which is why they are also known as one-way water valves. The water supply lines have a Brass Dual Check Valve with a backflow prevention device that protects the water supply lines from getting contaminated.

 

 

The Cz121 Brass High Pressure Check Valve material is basically a free-machining brass that has a duplex phase structure and comes with a 3% lead content. They possess high machinability. The ASTM B16 Alloy 360 Hydraulic Check Valves can be described as the simplest form of hydraulic device that permits oil flow only in one direction and blocks the flow coming from the opposite direction.

 

 

 

• Prevents water backflow. (Zero leakages.)
• Prevents water hammer.
• Prevents loss of prime in the pump systems.
• Prevents loss of water pressure in the building.

 

 

Brass Double Check Valve and BS 2872 Cz121 Non Return Check Valves manufacturer in Mumbai offer affordable prices

 

 

 

• Brass Body
• Screwed or Compression End Connections
• Sizes: 15mm to 28mm and 1/2" to 2"
• Conforms with EN13959
• WRAS approved (Compression: 15mm to 22mm only, Screwed: 1/2" to 2")
• Temperature range: 0°C to 85°C (Screwed End), 0°C to 100°C (Compression End)
• Pressure rating: 0-10 Bar

 

 

Manufacturer of BS 2874 Cz121 Inline Check Valves and IS 319 Grade 2 Brass NRV Valve for -25°C to 200°C, 100% factory tested

 

 

 

 

 

Supplier & exporter of ASTM B16 Alloy 360 Hydraulic Check Valves in Asia, Brass Instrumentation Check Valve available in male and female NPT Port connections

 

 

 

• Pressure pumps
• Boilers
• HVAC systems
• Pump discharge.
• Building Utilities
• Sump pumps
• Solar hot water systems