Copper Nickel Manifold Valve

Cupro Nickel High Pressure Manifold Valve and Cu-Ni 90/10 Instrumentation Manifolds manufacturer in India

Cu Ni 70/30 Instrumentation Manifold Valve and Cupro Nickel 5 Way Manifold Valve manufacturer in Mumbai

The Cu Ni 70/30 Instrumentation Manifold Valve are widely found in applications like purification plants of saline water, shipbuilding, seawater, and various services in the marine industry. Its resistance to chloride related stress corrosion cracking, good fabricability, and low microfouling rates have made the Cupro Nickel 5 Way Manifold Valve quite famous across the globe.

The design of the 90/10 Cupro Nickel 2 Way Manifold Valve is quite efficient. It comes with a single block that has a female screwed inlet and outlet port. It combines the isolation valve and the calibration valve. On the other hand, the 70/30 Cupro Nickel 3 Way Manifold Valve is primarily used for ensuring that the capsule will not be over ranged. The Copper Nickel 90/10 Instrument Solenoid Valve is controlled electromechanically, and when the units are energized/de-energized, it would either shut off or allow the flow of fluid.

The Copper Nickel 70/30 Hydraulic Manifold Valve can be described as a component that regulates the flow of fluid between the actuators and pumps, in a given hydraulic system. The DIN 2.0882 Manifold Control Valve consists of a series of valves which make use of an automatic valve for controlling and monitoring fluid flow through the given pipe. The UNS C70600 Instrumentation Manifolds are described as a process connection system providing isolation, equalization, venting for a wide range of pressure measurement applications.

 

 

 

The Copper Nickel Manifold Valve is made up of an alloy consisting of copper and nickel. It has some great mechanical properties due to its austenitic-ferritic microstructure. The Cu-Ni 90/10 High Pressure Manifold Valve has high strength and shows good resistance to corrosion. They can sustain surrounding conditions with a maximum temperature of 250 degrees F, and a maximum pressure of 250 psi.

 

 

 

Manufacturer of Copper Nickel 90/10 Instrument Solenoid Valve and DIN 2.0882 Manifold Control Valve 2 way, 3 way and 5 way configurations

 

 

 

 

90/10 Cupro Nickel 2 Way Manifold Valve and Copper Nickel 70/30 Hydraulic Manifold Valve supplier in India

 

• Copper Nickel 3-way Manifold Valve
  • 3-way T Type
  • 3-way R Type
  • 3-way H Type
• Copper Nickel 5-way Manifold Valve
  • 5-way T Type
  • 5-way R Type
  • 5-way H Type
• Copper Nickel 2-way Manifold Valve
  • 2-way T Type
  • 2-way R Type

 

 

• PMI Test Reports
• EN 10204 3.1, Chemical Reports
• Mill Test Certificates
• Mechanical Reports
• Third Party Inspection Reports
• Visual Inspection Reports
• Destructive Test Report
• NABL Approved Lab Reports
• Non Destructive Test Reports

 

 

Manufacturer of 70/30 Cupro Nickel 3 Way Manifold Valve and UNS C70600 Instrumentation Manifolds for potential leak free connections

 

• Mounting holes provided for self-supporting application.
• One-piece construction body provides strength.
• Panel mounting options available.
• Bonnet to body seals are metal to metal, No O-rings used.
• construction for superior corrosion resistance.

 

 

• Optional high temperature packing for compatibility to 1000
• Shroud with colour identification
• Double bonnet or single bonnet (optional)
• Handle: T-bar metal (standard) or circular plastic optional.
• Bar stock construction
• Bonnet-to-body-seat, metal-to-metal seal eliminates the need for O-ring seals.