UNS N04400 Compression Fittings and Alloy 400 Instrumentation Tube Fittings manufacturer in India

Monel Tube Fittings

Manufacturer of Alloy 400 Double Ferrule Fittings and UNS N04400 Compression Tube Fittings in Mumbai, greater pressure capability of UNS N04400 Flare Fittings, check Monel Tube Fittings price in India

 

The Monel Tube Fittings are made up of Monel material, which is a nickel/copper alloy, and it shows high resistance to corrosion. In fact, the Monel 400 Tube Fittings show better corrosion resistance properties compared to conventional stainless steel. The Alloy 400 Double Ferrule Fittings help to get a tight grip around the tube, without causing any potential damage risk to the wall. They can withstand temperatures of up to 1000 degrees F. The Monel 400 Compression Fittings are not considered ideal for acidic solutions even though they can resist sulphuric and hydrochloric acids at limited temperatures. However, it is to be noted that the UNS N04400 Compression Tube Fittings have superior resistance to the neutral and alkaline salt solutions.

The ASTM B564 UNS N04400 Instrumentation Fittings can effectively resist chloride ion-induced stress corrosion cracking, and thus they are used in seawater applications. The Nickel Alloy 400 Instrumentation Tube Fittings offer better leakage free connection compared to the other types of pipe fittings. The DIN 2.4360 Ferrule Fittings are also the primary components of the compression fitting assembly. It helps the water pressure inside the pipe to be consistent.

The ASME SB 564 UNS N04400 Bulkhead Union allows the pipe to connect to a tank. The process is carried out by cutting a hole in the tank where the fitting is inserted, and then a locknut thread is used to hold it in place. The locknut puts the required amount of pressure on the gasket, which helps to make a tight seal that is free from liquid leakage. Also, there is Monel K500 Tube Fittings made of the age-hardenable alloy that has nickel-copper. They posses the combined properties of alloy 400 along with high strength corrosion fatigue and resistance to erosion.

 

 

Specification of Monel 400 Tube Fittings
MATERIAL MONEL K500, MONEL 400
STANDARD ISO 8434-1/DIN 2353
PRESSURE  (HEAVY)S SERIES - 200 BAR TO 800 BAR
(MEDIUM)L SERIES - 100 BAR TO 500 BAR
(LOW) LL SERIES - 100 BAR
SERIES  L- MEDIUM PRESSURE,  LL- LOW PRESSURE , S- HIGH PRESSURE
SURFACE SHORT BLASTED FINISH, EXPORT BRIGHT FINISH, ELECTROPLATED FINISH
CONNECTIONS TUBE TO MALE THREAD/ TUBE/ BUTT WELD/ FEMALE THREAD , TUBE TO JIC 37* , TUBE TO SOCKET WELD/ SWIVEL END , TUBE TO 24* CONE, TUBE TO ADJUSTBALE STANDPIPE 
WELD NIPPLE TO FEMALE THREAD , WELD NIPPLE TO MALE THREAD , WELD NIPPLE TO SOCKET WELD , WELD NIPPLE TO BUTT WELD , WELD NIPPLE TO 37* JIC , WELD NIPPLE TO 24* CONE , WELD NIPPLE TO SWIVEL 
SIZE S SERIES - 6S TO 38S
L SERIES - 6L TO 42L
LL SERIES - 4LL TO 12LL
BODY TYPE BAR, FORGED STOCK

 

Monel Tube Fittings Price list
Description Price
Monel 400 Tube Fitting Used for Marine Fixtures US $1-10 / Piece
Monel 400 Tube Fitting
US $20.0 / Piece
Monel Tube Fitting
US $1-15 / Piece
Alloy 400 Double Ferrule Fitting
US $10-10000 / Piece
UNS N04400 Compression Tube Fitting
US $1-1000 / Piece
ASTM B564 UNS N04400 Instrumentation Fitting
US $10-200 / Piece
DIN 2.4360 Ferrule Fitting
US $3.8-30 / Piece
ASME SB 564 UNS N04400 Bulkhead Union
US $3-25 / Piece
Monel K500 Tube Fitting US $3-20 / Piece

 

Monel Tube Fittings

 

Must Know About Core product of Rajdeep Metals

 

Monel 400 Compression Fittings Size range
  Fitting Types Size Inch Size OD
Tube to Female Fitting 1/4" to 1 1/2" 6mm to 38mm
Pipe Fitting
Union
Male Fitting
  Tube Fittings Accessories

 

Packaging of DIN 2.4360 Ferrule Fittings
Packaging of DIN 2.4360 Ferrule Fittings

Depending on the products, we package our products in a variety of ways. The various packaging options for our products include:

  • Wooden Crates
  • Wooden Boxes
  • Shrink-wrapped
  • Wooden Pallets
  • Carton boxes

 

 

Alloy 400 Double Ferrule Fittings Pressure Rating
NPT/ISO PIPE SIZE IN. MONEL 400 FERRULE FITTING
FEMALE MALE
PSIG (BAR) PSIG (BAR)
1/8 6 500 (447) 10 000 (689)
1/16 6 700 (461) 11 000 (757)
1/4 6 600 (454) 8 000 (551)
2 3 900 (268) 3 900 (268)
1/2 4 900 (337) 7 700 (530)
3/8 5 300 (365) 7 800 (537)
3/4 4 600 (316) 7 300 (502)
1 1/4 5 000 (344) 6 000 (413)
1 4 400 (303) 5 300 (365)
1 1/2 4 600 (316) 5 000 (344)

 

Advantages of  Monel Tube Fittings
  • Good resistance to acids such as hydrofluoric and sulfuric acid
  • Highly resistant to alkalis
  • Malleable
  • Highly corrosion resistant
  • Stronger than steel

 

See What exactly We Supply ?
Monel 400 Tube X Standpipe Reducer
Monel 400 Tube X Standpipe Reducer
Monel Twin Ferrule Set
Monel Twin Ferrule Set
DIN 2.4360 Tube X Socket Weld Connector
DIN 2.4360 Tube X Socket Weld Connector
Alloy 400 Lap Joint Connector
Alloy 400 Lap Joint Connector
UNS N04400 Male Connector Jic
UNS N04400 Male Connector Jic
Nickel Alloy 400 Male Elbow Bspp
Nickel Alloy 400 Male Elbow Bspp
ASTM B564 UNS N04400 Bulkhead Male Connector Npt
ASTM B564 UNS N04400 Bulkhead Male Connector Npt
DIN 2.4360 Male Branch Tee Npt
DIN 2.4360 Male Branch Tee Npt
ASME SB 564 UNS N04400
 Tube X Flange Adapter
ASME SB 564 UNS N04400 Tube X Flange Adapter
Monel 4400 Male Branch Tee Npt
Monel 4400 Male Branch Tee Npt
Monel 45 Degree Male Elbow
Monel 45 Degree Male Elbow
2.4360 Alloy 400 Female Connector Bspp
2.4360 Alloy 400 Female Connector Bspp

 

ASTM B564 UNS N04400 Instrumentation Fittings Dimensions
Actual Outside Diameter Designation of Thread OD per inch Thread
(in.) (in.) (fraction inch) BSP  NPT
0.0405 1/8 13/32 28 27
0.03125 1/16 5/16 28 27
0.0540 1/4 35/64 19 18
0.0840 1/2 27/32 14 14
5.0563 5 5-5/8 11 8
0.0675 3/8 43/64 19 18
1.0050 3/4 1-3/64 14 14
1.0660 1-1/4 1-21/32 11 11-1/2
1.0315 1 1-5/16 11 11-1/2
1.0900 1-1/2 1-29/32 11 11-1/2
2.0875 2-1/2 2-7/8 11 8
2.0375 2 2-3/8 11 8
3.05 3 3-1/2 11 8
4.00 3-1/2 4 11 8
4.05 4 4-1/2 11 8
6.0625 6 6-5/8 11 8

 

ASTM B564 UNS N04400 Instrumentation Fittings and Monel 400 Compression Fittings supplier in India, torque-free seals

 

Monel K500 Tube Fittings Application
Monel K500 Tube Fittings Application
  • oil-well tools, Pump shafts
  • doctor blades and scrapers, instruments
  • valve trim, springs, fasteners
  • marine propeller shafts
  • Chemical and hydrocarbon processing equipments
  • Marine components
  • pumps, Valves, shafts, heat exchangers.fittings

 

ASME SB 564 UNS N04400 Bulkhead Union Equivalent
STANDARD AFNOR UNS BS WERKSTOFF NR. GOST JIS EN
Monel K500 N05500 2.4375
Monel 400 NU-30M N04400 NA 13 2.4360 МНЖМц 28-2,5-1,5 NW 4400 NiCu30Fe

 

Exporter & supplier of Nickel Alloy 400 Instrumentation Tube Fittings and DIN 2.4360 Ferrule Fittings for stressful applications

Check Our 2.4360 Monel 400 Tube Fittings stock list
  • Alloy 400 Male Elbow Bspt
  • Monel 400 Female Connector BSPT
  • DIN 2.4360 Female Connector Npt
  • ASTM B564 UNS N04400 Male Elbow Npt
  • DIN 2.4360 Tube X An Adaptor
  • Nickel Alloy 400 Male Run Tee Npt
  • Monel K500 Female Elbow Npt
  • ASME SB 564 UNS N04400 Tube X Butt Weld Elbow
  • Monel K500 Bulkhead Female Connector Npt
  • ASTM B564 UNS N04400 Bulkhead Male Connector Jic
  • DIN 2.4360 Tube X Socket Weld Elbow
  • Monel K500 Positional Male Branch Tee
  • 2.4360 Standpipe X Bulkhead Tube Reducer
  • DIN 2.4360 Tube X Butt Weld Connector
  • UNS N04400 Gauge Connector Bspp
  • ASTM B564 UNS N04400 Male Adaptor Standpipe X Npt
  • ASME SB 564 UNS N04400 Female Adaptor Standpipe X Npt
  • DIN 2.4360 Male Adaptor Standpipe X Bspt
  • Alloy 400 Female Run Tee Npt
  • UNS N04400 Male Adaptor Standpipe X Bsp
  • Nickel Alloy 400 Female Adaptor Standpipe X Bsp
  • Monel 400 Tube Insert

 

Monel Grade 400 Compression Elbow Mechanical Properties
Tensile strength, Ultimate 550 Mpa
Tensile strength, Yield 240 Mpa
Elongation at Break 48%

 

Chemical Composition of Nickel Alloy 400 Tube Fittings
Designation Sonstige Autres-Other % Co% C% Cr% Fe% Ni% Mo% W% V% Ai% Nb/Cb Ta% Cu% Ti%
Monel 400 Mn 1.0 - 0.12 - 1.5 65.0 - - - - - 32.0 -
Monel 401 Si 0.25; Mn 2.25 - 0.10 - 0.75 43.0 - - - - - 53.0 -
Monel 404 Mn 0.10; Si 0.10;S o.024 - 0.15 0.50 52.0-57.0 - - 0.05 - rest/bal -
Monel 502 Mn 1.5;Si 0.5; S 0.010 - 0.10 - 2.0 63.0-17.0 - - - 2.5-3.5 - rest/bal 0.50
Monel K 500 Mn 0.8 - 0.13 - 1.0 64.0 - - - 2.8 - 30.0 0.6
Monel R 405 Mn 1.0; S 0.04 - 0.15 - 1.2 66.0 - - - - - 31.0 -

 

Burr-free Alloy 400 Bulkhead Union and Monel 400 Tube Fittings manufacturer in India, entirely interchangeable with Parker & Swagelok Monel Tube Fittings

 

We can supply express delivery to here
UNS N04400 Compression Tube Fittings
UNS N04400 Compression Tube Fitting
conmix .ltd, UAE
Alloy 400 Double Ferrule Fittings
Alloy 400 Double Ferrule Fitting
Sp Chemicals Pte. Ltd, Singapore
Monel 400 Compression Fittings
Monel 400 Compression Fitting
Jotun, Norway