Needle Valve manufacturer in India

316 Stainless Steel Needle Valve and Instrument Needle Valve manufacturer in Mumbai

Manufacturer of Stainless Steel Needle Valve and Socket Weld Needle Valve in 600 PSI - 20,000 PSI, check SS 304 Needle Valve price list

The 3 Way Needle Valve comes with a small plunger that looks like a needle and helps the valve control the flow efficiently. Clients can also get the Union Bonnet Needle Valve, primarily designed for severe services. The Panel Mounted Needle Valve includes a tapered pin that helps to gradually open or close the water stream and control the precise flow regulation. The Angle Needle Valve helps to turn the flow from the inlet by 90 degrees, which allows for better system irrigation. The Ptfe Needle Valve comes with excellent thermal and chemical properties. They are primarily used in gasket applications, wherein high corrosion resistance is an essential requirement. The High Pressure Needle Valve is designed for high-pressure applications like 15000 - 60000 psi and is suitable for space-restricted control panels.

It is essential to understand the application requirements for pressure in the given system so as to select the right valve. For example, a 3000 Psi Needle Valve cannot handle the pressure of more than 3000 psi. Similarly, the pressure limit for 6000 Psi Needle Valve is 6000 psi. When clients need a valve for higher pressure environments, say for a hydraulic system, a high-performance 10000 Psi Needle Valve is used to handle pressure up to 10000 psi. Even a higher pressure tolerance valve, like the 15000 Psi Needle Valve is required when we are talking about high pressure and temperature surroundings. However, a specially designed vacuum Needle Valve SS316 is needed when we are talking about handling low-pressure conditions.

The SS 304 Needle Valve is abundantly used across all types of fluid control applications due to its ability to precisely control the flow rate. It can also be used in various corrosive environments. High Pressure Needle Valve Manufacturers produce durable needle valves that can sustain high temperature and pressure. For example, the it is used in hydraulic systems where the pressure conditions are quite intense. The 316 Stainless Steel Needle Valve can be used in aggressive and corrosive media, like in various seawater applications.

 

 

it is used for accurately controlling the flow of clean fluids or gases. Gradual adjustments are needed to be made to smoothly control the flow rate. The Stainless Steel Needle Valves is also widely and reliably used as the shut-off valve. However, it is to be noted that the Socket Weld Needle Valves can only be used at low flow rates.

They have a relatively large pressure drop from the inlet to the outlet. The common port size ranges between ⅛” and 2”, and they can be customized according to the application requirements. Needle Valve manufacturers in India manufacture the product for applications like controlling gas flow- propane flow inside a propane tank.

 

 

 

 

 

A principal functions are to control liquid or gas flow and safeguard sensitive gauges from harm caused by pressure spikes of liquids and gases.

 

 

Manufacturer of High Pressure and Pneumatic Needle Valve in angle & Inline patterns, view Needle Valve SS316 price in India

 

Advantages

• They can be used for throttling purpose.
• These valves can shut off easily.
• smaller in size.
• The flow control at a low rate is very accurate.
• used as bleed valves for hot water heating.
• Flow rates can be adjusted accurately.

Disadvantages

• Simply looking at the handle position cannot determine whether it is open or closed.
• They are only suitable for piping systems with low flow rates.
• The high fluid flow restriction causes a high pressure loss in the needle valve.
• These kinds of valves cannot be opened or closed immediately. Immediate actions may harm the need valves seat.
• If the fluid contains solid particles, the seat and needle may be harmed.

 

• Oil and gas in gas or liquid dispensation
• Power generation
• Instrumentation control
• Automatic combustion control systems
• Cooling

 

• MIL-V-24586
• BS 7174 P4
• ASME B16.34
• PIP PNDMV09N

 

 

Male X Female

 

Female X Female

 

Male X Male

 

Angle Needle Valve and 3 Way Needle Valve manufacturer in India, 100% factory tested

 

 

 

 

Three different varieties of are offered on the market, depending on the operation style. As follows:

• Motorized
• Manually operated threaded
• Angle

Using a manual or automatic process, valves can be used. When it is handled manually, its disc is turned by a handwheel. The valve's plunger raises to open when the handle is twisted clockwise, allowing fluid to pass through. When the handle is twisted counterclockwise, the plunger gets closer to the seat, slows the flow rate, and eventually blocks the flow of liquid.

Automated valves have a hydraulic motor or an air actuator attached to them, which aids in the valve's automatic opening and closing. The motor or actuator will assist in adjusting the plunger's position in accordance with the timer or external data provided into the system during monitoring. The flow rate of a fluid can be precisely controlled with valves that are both manually and automatically operated.

Manufacturer of Panel Mounted and High Pressure Hydraulic Needle Valve as per ASTM A182 Type F316 specification

 

• Brass
• Inconel
• Hastelloy
• Monel
• Duplex
• Super Duplex
• Titanium
• Copper Nickel

 

 

• Large orifices at rated pressures
• Working pressure up to 14.000 bar / 200.000 psi
• Smooth operation under pressure
• Panel mounting or in-line connection
• Excellent flow capacity.
• Suitable for fluids and gases
• High quality stainless steel