SS 316 JIC Adapter and SAE Bulkhead Fitting manufacturer in India

Stainless Steel JIC Fittings

Manufacturer of 316 Stainless Steel JIC Hydraulic Fittings and Brass JIC Tube Fittings for leak free system, entirely intermixable with Parker & Swagelok designed JIC Pipe Fittings

Joint Industry Council or JIC fittings are defined by the SAE J514. They are compression fittings machined with parallel threads and a 37-degree flare seating surface. One of the most common uses of the JIC Hydraulic Fittings is in fluid power and fuel delivery applications. In other words, the JIC Tube Fittings are ideal for different types of high-pressure applications. They come with male and female components which possess the 37 degree flare and the strong sealing is executed by connecting the male flare with the female coned seat. This Cone and Thread Fittings can be defined as a mechanical connection, which is established using components such as fitting, flare, nut, and sleeve.

There are several advantages offered by the JIC Pipe Fittings, like:

  1. They are widely available because of their popularity across different industries.
  2. Stainless Steel JIC Fittings manufacturers in India make products in sizes that are consistent with SAE fittings. This helps with their easy identification and interchangeability.
  3. The absence of O-ring in the SAE Fittings makes them perfect to be used in high-temperature applications.
  4. They can be connected and disconnected without deformation or hassles and are known for easy installation and maintenance.

The 37 Degree Flare Fittings are known for having a great design, and they show significant performance characteristics compared to the standard pipe fittings. They are mostly used in thin to medium walls in various tubing solutions. The JIC Adapter is most commonly used in hydraulic design applications, and that is why it can be found in aerospace and military equipment. The JIC Plug is chosen over other fittings because of its affordability and the fact that they are available in different sizes. The JIC Bulkhead Fitting is available in a multitude of variations, which can easily adapt to both imperial and metric. This feature gives it the capability to virtually fit into any hose or port. The JIC Female Fittings show good performance in both high and low-temperature environments.

 

 

What are JIC fittings?

JIC fittings are produced in compliance with ISO 8434-2 and SAE J514 standards. Sleeve, nut, and body make up a complete set of JIC fittings, and the body is machined with a 37-degree flared seating surface. In the market, this is referred to as flared fittings. This fitting is intended for usage in a variety of industries, although it is most popular in the high pressure sector.

 

Specification of JIC Hydraulic Fittings
Standard  SAE J514 / ISO 8434-2
Size Range  6 Mm To 42 Mm, 1/8" Jic To 2" Jic
O-ring & Seals  Viton (-25*c To 200* C), Nbr ( -35*c To 100* C ), Ptfe - (-60*c To 240*)
Working Pressure  100 Bar - 800 Bar
Equivalent Brands HY-LOK, PARKER, HYDAC, STAUFF, DK-LOK,VOSS
Material CS, SS 304, SS 304l, SS 316, SS 316l, SS 316ti, Alloy 20, Brass, Super Duplex, Copper, Duplex, Monel, 904l, Hastelloy, 6mo, Inconel, Titanium, Alumnium, MS
Accessories Dowty Seal, Cutting Ring, O-ring, Ed Seal, Copper Washer, Nut
Body Type Bar, Forged Stock
Material Designator Steel - Jis G4051 S20c, Astm 108/a105, S45c,/g3201 Sf440a.
Stainless Steel - Astm 182,Astm A 276
Brass - Astm B282 Alloy 37700, Astm B16 Uns C36000, C3771, Jis H3250 C3604, Jis H3250 C3771.
Thread Type
  • JIC (1st connection) x BSPP (2nd connection)
  • JIC (1st connection) x JIC (2nd connection)
  • JIC (1st connection) x NPT (2nd connection)
Temperature  stainless Steel - (-60*c To 400*c), Steel - (-40* C To 120*c), Brass - (-60*c To 175*c)
Surface Carbon Steel -Yellow Platting, trivalent Zinc Plated, Black Phosphated
Stainless Steel - Short Blasted Finish, Export Bright Finish, Electroplated Finish

 

JIC vs NPT
JIC vs NPT
Features National Pipe Thread (NPT) 37° Flare (JIC)
Vibration Resistance Poor ​Good
Working Pressure  Good Very Good
Seal Reliability Poor Good
Reusability Poor Good
Ease of Installation Good Good
Temperature ​Excellent Excellent

 

Stainless Steel 304 Cone and Thread Fittings manufacturer in Mumbai, check SS SAE Fittings sizes and price in India

 

JIC Tube Fittings Price list
Description Price
3/4"-16 JIC SWIVEL FEMALE FOR WELDING TO METALLIC HOSE £10.03
7/16"-20 JIC x 1/4" NPT MALE / MALE HEX ADAPTOR £6.02
1.5/16"-12 x 7/8"-14 JIC TUBE END REDUCER TYPE £14.93
1.1/16-12 JIC UNION BULKHEAD C/W BACKNUT £32.21
9/16"-18 JIC SWIVEL FEMALE x 1/4" NPT MALE ADAPTOR £12.63
9/16"-18 JIC x 1/2" NPT MALE / MALE HEX ADAPTOR £9.11
1.5/16"-12 JIC SLEEVE NUT £12.82
7/16"-20 JIC HEX HEAD PLUG £3.41
7/16"-20 JIC x 1/4" BSPP CONE SEAT MALE / MALE HEX ADAPTOR £7.59

 

What are most Frequently used Types of Stainless Steel JIC Fittings 
JIC Adapter
JIC Adapter
JIC Plug
JIC Plug
JIC Bulkhead Fitting
JIC Bulkhead Fitting
JIC Female Fittings
JIC Female Fittings
Brass JIC Fittings
Brass JIC Fittings
JIC Caps And Plugs
JIC Caps And Plugs
JIC Swivel
JIC Swivel
JIC Adapter Fittings
JIC Adapter Fittings
JIC Male Fitting
JIC Male Fitting
JIC 90 Degree Elbow
JIC 90 Degree Elbow
JIC Female Swivel
JIC Female Swivel
Metric JIC Fittings
Metric JIC Fittings

 

Stainless Steel 316 JIC Plug and JIC Female Fittings supplier in India, view latest online price ex Mumbai

 

SAE Fittings Tighten torque
Tube OD (metric size) Assembly Torque (Nm) 
Steel & SS316 Material
Tube OD (inch size) Over Torque (Nm) 
Steel & SS316 Material
8 19-21 5/16 31
6 15-16 1/4 24
10 24-28 3/8 42
16​ 77-85 5/8 114
38 215-226 1  1/2 339
12 49-53 1/2 80
25 147-154 1 214
20 107-119 3/4 160
32 172-181 1  1/4 ​271
50 332-350 2 497

 

JIC Swivel Fitting Design and Construction

JIC Swivel Fitting Design and Construction

 

How does the seal on JIC fittings impact temperature rating?
Temperature Rating Seal Material
-20 °C to 180 °C (-4 °F to 356 °F) FKM / VITON
-23 °C to 120 °C (-9 °F to 248 °F)
NBR

 

Material Temperature Rating Surface Protection
 Carbon Steel  ​-60 °C to 200 °C White Zinc Plating
Stainless Steel SS316 ​-60 °C to 200 °C Passivation
 Brass  -45 °C to 175 °C Acid Cleaning

 

Manufacturer of Stainless Steel JIC Flare Fittings and SS 316 SAE Hydraulic Fittings for fluid transfer system, buy JIC Tube Fittings at manufacturing cost

 

JIC Bulkhead Fitting Size range
Dash Size Nominal Thread Size (UNF) Tube Size
- 03 3/8 - 24
3/16"
- 02 5/16 - 24 1/8"
- 04 7/16 - 20 1/4"
- 06 9/16 - 18 3/8"
- 05 1/2 - 20 5/16"
- 08 3/4 - 16 1/2"
- 12 1  1/16 - 12 3/4"
- 10 7/8 - 14 5/8"
-32 2  1/2 - 12 2"
- 14 1  3/16 - 12 7/8"
- 20 1  5/8 - 12 1  1/4"
- 16 1  5/16 - 12 1"
- 24 1  7/8 - 12 1  1/2"

 

Difference Between An And Jic
Difference Between An And Jic
  • AN fittings are commonly available in stainless steel (CRES), carbon steel, titanium, aluminum, and copper-nickel.
  • JIC commonly produced out of stainless steel, carbon steel, and brass.

size chart of JIC and AN

Female thread inside diameter (mm) Dash size Thread size Male thread outside diameter (mm) Threads per inch
8.3 -3 0.375 9.5 24
6.7  -2 0.3125 7.9 24
9.9 -4 0.4375 11.1 20
12.7 -6 0.5625 14.3 18
11.5 -5 0.5 12.7 20
17.5 -8 0.75 19.1 16
24.6 -12 1.0625 27 12
61.5 -32 2.5 63.5 12
20.6 -10 0.875 22.2 14
28.2 -14 1.1875 30.2 12
39.3 -20 1.625 41.3 12
31.4 -16 1.3125 33.3 12
45.6 -24 1.875 47.6 12

 

JIC Flare Fittings Installation Steps
  • Step 1: Verify that the fitting and sealing surface is unharmed. Before installation, trim the tube to the desired length and flare the end to a 37-degree angle.
  • Step 2:Lubricate the flare's surface and the threads.
  • Step 3: Onto the tube end connector, screw the nut and sleeve. After lining up the parts for hand tightening, crank the flare nut until the sealing surface is completely contacted.
  • Step 4: Verify the tightening torque value and confirm that the sealing is connected in accordance with the standards.

 

JIC Adapter Fittings Thread Chart

JIC Adapter Fittings Thread Chart

Dash size Inch size Thread Size Male Thread O.D. (in) Female thread O.D (in)
-3 3⁄16 3⁄8 - 24 3⁄8 0.38 0.34 11⁄32
-2 1⁄8 5⁄16 - 24 5⁄16 0.31 0.27 9⁄32
-4 1⁄4 7⁄16 - 20 7⁄16 0.44 0.39 13⁄32
-6 3⁄8 9⁄16 - 18 9⁄16 0.56 0.51 17⁄32
-5 5⁄16 1⁄2 - 20 1⁄2 0.50 0.45 15⁄32
-8 1⁄2 3⁄4 - 16 3⁄4 0.75 0.69 11⁄16
-32 2 2 1⁄2 - 12 2 1⁄2 2.50 2.42 2 7⁄16
-12 3⁄4 1 1⁄16 - 12 11⁄16 1.06 0.98 1
-10 5⁄8 7⁄8 - 14 7⁄8 0.88 0.81 13⁄16
-14 7⁄8 1 3⁄16 - 12 1 3⁄16 1.19 1.10 1 1⁄8
-20 1 1⁄4 1 5⁄8 - 12 1 5⁄8 1.63 1.54 1 9⁄16
-16 1 1 5⁄16 - 12 1 5⁄16 1.31 1.23 1 1⁄4
-24 1 1⁄2 1 7⁄8 - 12 1 7⁄8 1.88 1.79 1 13⁄16

 

Pressure Rating of JIC Female Fittings
SAE Dash Size Thread Size SAE Boss Adjustable Studs (psi) Nominal Tube OD (inch) Female Swivels (psi) Flared Tube Ends (psi) SAE BOSS Studs (psi)
-03 3/8 24 UNF 5,000 3/16 5,000 5,000 5,000
-04 7/16 20 UNF 4,500 1/4 4,500 5,000 5,000
-02 5/16 24 UNF 5,000 1/8 5,000 5,000 5,000
-05 1/2 20 UNF 4,000 5/16 4,000 5,000 5,000
-08 3/4 16 UNF 4,000 1/2 4,000 4,500 4,500
-06 9/16 18 UNF 4,000 3/8 4,000 5,000 5,000
-10 7/8 14 UNF 3,000 5/8 3,000 3,500 3,500
-14 1-3/16 12 UN 2,500 7/8 2,500 3,000 3,000
-12 1-1/16 12 UN 3,000 3/4 3,000 3,500 3,500
-16 1-5/16 12 UN 2,500 1 2,500 3,000 3,000
-24 1-7/8 12 UN 1,500 1-1/2 1,500 2,000 2,000
-20 1-5/8 12 UN 2,000 1-1/4 2,000 2,500 2,500
-32 2-1/2 12 UN 1,125 2 1,125 1,500 1,500


Cone and Thread Fittings Application
  • Machine Tools
  • Drilling Platforms
  • Construction Equipments
  • Hydro Power Plants
  • Wind Tubrine
  • Stationary Hydraulic Equipment
  • Shipbuilding
  • Railway Technology
  • Mobile Hydraulic Equipment