Super Duplex Needle Valve

SMO 254 Instrumentation Needle Valve and Super Duplex 2507 Pneumatic Needle Valve manufacturer in India

6MO Needle Valve and 2507 Duplex Socket Weld Needle Valve supplier in Mumbai, buy online at wholesale prices now!

The Super Duplex Needle Valve is made of an alloy that is basically austenitic-ferritic stainless steel. It also has several other alloying elements added to the composition like chromium, nickel, and molybdenum. The Super Duplex 2507 Needle Valve can either isolate or regulate the media flow across a wide range of piping systems. Their closing mechanism contains a disk that can be easily rotated. They can be opened by lifting a barrier which enables the pathway for the media flow. The SMO 254 Needle Valve comes with a wide range of properties like high tensile strength and superior corrosion resistance. They can also effectively withstand elevated temperature settings. The 6MO Needle Valve also shows good resistance to pitting in some highly corrosive environments.

The ends of the 2507 Duplex Socket Weld Needle Valve are welded to the tubing solutions. They are mostly found in the oil and gas industry. It helps to lower the leakage risks of high pressure fluids or viscous gases running through the connections. Clients can get UNS S32750 Angle Needle Valve which is used for regulating the substance flow, usually in gas or water, through a system. The UNS S32760 3 Way Needle Valve controls two different outlet by a single inlet to maintain the safety and hygiene of the supplies. The ASTM A182 2507 Union Bonnet Needle Valve is primarily designed for various severe services and it can help with rapid shut-off and back flow prevention. The Alloy 2507 Panel Mounted Needle Valve comes with a tapered pin which gradually helps to open or close the water stream and helps with precise flow regulation. It is important to know the pressure demand of the application to select the right needle valve. For example, when using ASTM A182 S32750 3000 Psi Needle Valve, it will not be able to handle pressure higher than 3000 psi.

 

 

 

 

 

 

1500 PSI to 20000 PSI Super Duplex 2507 Needle Valve and UNS S32750 Angle Needle Valve manufacturer in India, factory prices

 

• If the fluid contains solid particles, the seat and needle may be harmed.
• They are only suitable for piping systems with low flow rates.
• The high fluid flow restriction causes a high pressure loss in the needle valve.
• These kinds of valves cannot be opened or closed immediately. Immediate actions may harm the need valves seat.
• Simply looking at the handle position cannot determine whether it is open or closed.

 

 

 

Manufacturer of UNS S32760 3 Way Needle Valve and ASTM A182 2507 Union Bonnet Needle Valve exporter in India

 

 

• ASME B16.34
• BS 7174 P4
• PIP PNDMV09N
• MIL-V-24586

 

 

• Low rate of thermal expansion.
• Superior resistance to chloride pitting and crevice corrosion.
• High Strength.
• Combination of properties given by austenitic and ferritic structure.
• High resistance to chloride stress corrosion cracking.
• Good weldability and workability.
• Suggested for applications up to 600° F.
• Good general corrosion resistance.

 

 

 

 

Manufacturer of Alloy 2507 Panel Mounted Needle Valve and SA 182 S32750 3000 Psi Needle Valve as per ASME SA 182/ ASTM A182 American standards

 

 

• Cargo tanks and pipe systems in chemical tankers.
• Offshore technology.
• Oil and gas equipment.
• Pulp and paper industry.
• reactor tanks, Pressure vessels, and heat exchangers.
• Firewalls and blast walls on offshore platforms.
• Storage tanks.
• Seawater desalination plants.
• impellers, Rotors and shafts.
• Desalination plants and seawater systems.
• Chemical industry, especially when handling chlorides.
• Flue-gas cleaning.