316 Stainless Steel Bulkhead Union Elbow and Brass Union Elbow manufacturer in India

Union Elbow

Manufacturer of Stainless Steel 304 Union Elbow and Brass Compression Elbow for critical offshore application, completely interchangeable with Swagelok & Parker Union Elbow

Clients should buy products from renowned Bulkhead Elbow manufacturer in India, to ensure that they get quality at a competitive price. They offer full customization on the Stainless Steel Compression Elbow, which comes with sturdy construction, optimum strength, and they are known for withstanding corrosive and high-pressure environments. The Bulkhead Union Elbow is known for its reliability, durability, and they can be used for an extended time, without a lot of maintenance.

The Brass Flare Union Elbow is designed efficiently and thus help to reduce the maintenance cost. They can be easily assembled and disassembled without much effect on the seal of the pipes and possess cold ductility. The Stainless Steel Union Elbow is found in various fuel equipment, plumbing, vacuum and gas lines, etc.

The application of Instrumentation Male Elbow is also varied and thus, they can be found in several industries. They are mostly found in high temperature and high pressure applications, along with corrosive media, flammable gasses, and so on. The Bulkhead Union Elbow comes with an easy installation, and they can be used for different services without much hassle. The 45 Degree Union Elbow is available with different coatings, like they are available in brass material with a nickel plating to show better resistance to corrosion and get an extended service life.

 

 

What is Union Elbow ?

The Union Elbow is basically used for tube connections at 90 degrees. They are a key component of the pressure piping system, which helps to change the direction of the flow. The Stainless Steel 304 Union Elbow can connect two pipes of same or different nominal diameters, and they turn the direction of fluid to a certain angle (90 degrees or 45 degrees).

The 316 Stainless Steel Union Elbow fulfills the design requirements of the given standards- DIN 2353, DIN EN 3851, and ISO 8434-1. This would ensure that there is an easy interchangeability with other brands. The Brass Compression Elbow is basically used for a wide range of applications across several industries, due to their features. It is widely known for its good strength and high corrosion resistance. They possess good bearing properties and is quite popular for its good conductivity.

 

Stainless Steel Compression Elbow Price in india
Description Price
6000 Psi Double Ferrule Tube Union Elbow US$ 3-20 / Piece
Stainless Steel Male Female Thread Union Elbow US$ 0.2-0.5 / Piece
Stainless Steel Threaded Union 90° Elbow for Water Supply US$ 1-4 / Piece
Union 90 Degree Elbow US$ 9-100 / Piece
Brass Union Connector Elbow US$ 1.5-2 / Piece

 

Material Specification of Bulkhead Union Elbow
Fitting Side B Connection Type Male Flareless Bite
Fitting Side A Connection Type Male Flareless Bite
Equivalent HY-LOK, HYDAC, PARKER, STAUFF, DK-LOK, VOSS, SMC
Fitting Side A Tube Outer Diameter 1/4 in
Finish/Coating Zinc Nickel Plated
Fitting Side B Tube Outer Diameter 1/4 in
Maximum Operating Temperature 500 Degrees F
Maximum Operating Pressure 5,000 psi
Specific Fitting Shape 90 / 45 Degrees
Hardness 72 HRB
Overall Length 7/8 in
Pressure Range Series LL Up to 100 bar
L Up to 500 bar
S Up to 800 bar
Wall Thickness 0.065 in
Material Monel, Nickel Alloy, Stainless Steel, Steel
Application Air

 

Stainless Steel 304 Union Elbow Dimensions
Stainless Steel 304 Union Elbow Dimensions
Union Elbows (MM)
A D W E
mm mm in mm mm
3 2.40 3/8 9.50 22.30
4 2.40 1/2 12.70 25.40
6 4.80 1/2 12.70 27.00
8 6.40 5/8 16.00 29.90
10 7.90 11/16 17.50 31.50
12 9.50 13/16 20.60 36.00
14 11.10 15/16 23.80 38.80
15 11.90 15/16 23.80 38.80
16 12.70 15/16 23.80 38.80
18 15.10 11/8 28.60 39.80
20 15.90 13/8 34.90 44.60
22 18.30 13/8 34.90 44.60
25 21.80 13/8 34.90 49.10

 

Union Elbows (IN)
A w D E
mm in in mm mm mm
4.76 3/16 1/2 12.70 3.04 25.65
3.17 1/8 3/8 9.52 2.28 22.35
6.35 1/4 1/2 12.70 4.82 26.92
25.40 1 13/8 34.92 22.35 49
9.52 3/8 5/8 15.87 7.11 30.48
7.93 5/16 5/8 15.87 6.35 28.7
12.70 1/2 13/16 20.63 10.41 36.06
19.05 3/4 11/8 28.60 15.74 39.89
15.87 5/8 15/16 23.81 12.70 38.1
22.22 7/8 13/16 30.20 18.28 44.7

 

Most Popular Types of Bulkhead Elbow
Union Elbow
Union Elbow
Stainless Steel 304 Union Elbow
Stainless Steel 304 Union Elbow
316 Stainless Steel Union Elbow
316 Stainless Steel Union Elbow
Brass Union Elbow
Brass Union Elbow
Brass Compression Elbow
Brass Compression Elbow
Bulkhead Elbow
Bulkhead Elbow
Stainless Steel Compression Elbow
Stainless Steel Compression Elbow
Bulkhead Union Elbow
Bulkhead Union Elbow
90 Degree Union Elbow
90 Degree Union Elbow
45 Degree Union Elbow
45 Degree Union Elbow
Stainless Steel Union Elbow
Stainless Steel Union Elbow
Brass Flare Union Elbow
Brass Flare Union Elbow

 

90 Degree Union Elbow and Bulkhead Elbow manufacturer in India, view 316 Stainless Steel Union Elbow price list in Mumbai

 

Bulkhead Union Elbow Material
Material Grade
Stainless Steel ASTM A182/ ASTM A 276 F321H, 304L, 316, 321, 317, 310S, 316L, 347H, 316Ti, 904L 347, 304H, 304, 310,
Carbon Steel ASTM A105/ ASME SA 105/ EN 1A SERIES
Duplex & Super Duplex Steel ASTM A182/ASTM A276 F61, F51, F45, F60, F55, F53, F44, Duplex 2205, Super Duplex 2507
Copper ASTM B88 Type K, Type L
Nickel Alloy ASTM B564 Nickel 201 (UNS No. N02201), Nickel 200 (UNS No. N02200), Monel 500 (UNS No. N05500), Monel 400 (UNS No. N04400), Inconel 825 (UNS No. N08825), Inconel 800 (UNS No. N08800), Inconel 625 (UNS No. N06625), Inconel 600 (UNS No. N06600), Hastelloy C276 (UNS No. N10276), Inconel 601 (UNS No. N06601), Alloy 20 (UNS No. N08020)
Brass ASTM B16 UNS C36000, ASTM B282 ALLOY 37700, JIS H3250 C3604, JIS H3250 C3771, C3771, Cz121 Brass, Alloy 360, IS 319 Grade 1 Brass, IS 319 Grade 2 Brass, BS 2874 Cz121, BS 2872 Cz121, ASTM B124 Alloy 377
Titanium ASTM B348 / ASME SB 348 Grade 5, Grade 2
Copper Nickel
ASME SB467/467M Cupro Nickel 90/10, Cuni 70/30

 

316 Stainless Steel Union Elbow Sizes
SERIES TUBE OD. I2 S2 S1 L2 PART NO.
METRIC
SIZE TUBE
L 250 Kg/cm2 6 12 14 12 27 E6L
8 14 17 14 29 E8L
10 15 19 17 30 E10L
12 17 22 19 32 E12L
15 21 27 22 36 E15L
160 Kg/cm2 18 23.5 32 27 40 E18L
22 27.5 36 30 44 E22L
100 Kg/cm2 28 30.5 41 36 47 E28L
35 34.54 50 46 56 E35L
42 40 60 55 63 E42L
H 630 Kg/cm2 6 16 17 14 31 E6L
8 17 19 17 32 E8L
10 17.5 22 19 34 E10L
12 21.5 24 22 38 E12L
14 22 27 22 40 E14L
400 Kg/cm2 16 24.5 30 24 43 E16L
20 26.5 36 30 48 E20L
25 30 46 36 54 E25L
250 Kg/cm2 30 35.5 50 44 62 E30L
38 41 60 55 72 E38L

 

Brass Flare Union Elbow Working Temperature
  • Allowable Fittings Material Working Temperature:
    • Steel -40 ℃ to +120 ℃ (DIN 3859)
    • Stainless Steel: -60 ℃ to +400 ℃ (DIN 17440)
    • Brass -60 ℃ to +175 ℃
  • Allowable Seals Material Working Temperature:
    • FKM -25 ℃ to +200 ℃
    • NBR -35 ℃ to +100 ℃
    • PTFE -60 ℃ to +240 ℃

 

45 Degree Union Elbow Dimensions

45 Degree Union Elbow Dimensions

45 Degree Union Elbows (Od Tube Imperial)

0D H mm

0D1

Imperial

A Inch F Hex L Inch
0.05 19.7 1/16 0.34 5/16 0.99
0.09 26.1 1/8 0.50 7/16 1.40
0.12 26.1 3/16 0.54 7/16 1.47
0.19 27.1 1/4 0.60 1/2 1.61
0.25 30.3 5/16 0.64 9/16 1.69
0.28 30.3 3/8 0.66 5/8 1.77
0.41 31.5 1/2 0.90 13/16 2.02
0.50 31.5 5/8 0.96 15/16 2.05
0.62 32.5 3/4 0.96 1-1/16 2.11
0.72 35.9 7/8 1.02 1-3/16 2.17
0.88 40.9 1 1.23 1-3/8 2.55
1.04 48.00 1-1/4 1.62 1-7/8 3.63
1.34 53.60 1-1/2 1.97 2-1/4 4.25
1.81 74.70 2 2.66 3 5.88

 

45 Degree Union Elbows (Od Tube Metric)

0D H mm 0D1 Imperial A Inch F Hex L Inch
0.05 19.7 1/16 0.34 5/16 0.99
0.09 26.1 1/8 0.50 7/16 1.40
0.12 26.1 3/16 0.54 7/16 1.47
0.19 27.1 1/4 0.60 1/2 1.61
0.25 30.3 5/16 0.64 9/16 1.69
0.28 30.3 3/8 0.66 5/8 1.77
0.41 31.5 1/2 0.90 13/16 2.02
0.50 31.5 5/8 0.96 15/16 2.05
0.62 32.5 3/4 0.96 1-1/16 2.11

 

Exporter of Stainless Steel Compression Elbow and Brass Flare Union Elbow to stop chemical injection leaks, check Bulkhead Union Elbow price in India

 

Brass Union Elbow Standards
Brass Union Elbow
  Standards
  • ISO 8434-1
  • DIN 2353
  • DIN EN 3851

90 Degree Union Elbow Dimensions
ØA L ØE I Hex 2 F L1 FLAT
Tube OD
1/16 (1.59) 0.72 (18.2) 0.05 (1.3) 0.19 (4.9) 5/16 0.35 (8.9) 0.56 (14.2) 3/8
1/8 (3.18) 0.89 (22.5) 0.09 (2.3) 0.25 (6.4) 7/16 0.51 (13.0) 0.62 (15.8) 3/8
3/16 (4.76) 1.01 (25.7) 0.12 (3.0) 0.28 (7.2) 1/2 0.54 (13.8) 0.75 (19.0) 1/2
1/4 (6.35) 1.08 (27.5) 0.19 (4.8) 0.31 (7.9) 9/16 0.61 (15.4) 0.79 (20.0) 1/2
5/16 (7.94) 1.18 (29.9) 0.25 (6.4) 0.35 (8.8) 5/8 0.64 (16.3) 0.88 (22.4) 5/8
3/8 (9.53) 1.20 (30.5) 0.28 (7.1) 0.37 (9.5) 11/16 0.67 (17.0) 0.91 (23.0) 5/8
1/2 (12.7) 1.39 (35.3) 0.41 (10.4) 0.50 (12.7) 7/8 0.91 (23.0) 0.98 (25.0) 13/16
5/8 (15.88) 1.47 (37.3) 0.50 (12.7) 0.56 (14.3) 1 0.97 (24.6) 1.06 (27.0) 15/16
3/4 (19.05) 1.52 (38.5) 0.62 (15.8) 0.56 (14.3) 1-1/8 0.97 (24.6) 1.11 (28.2) 1-1/16
7/8 (22.23) 1.68 (42.7) 0.72 (18.3) 0.63 (15.9) 1-1/4 1.03 (26.1) 1.28 (32.5) 1-1/4
1 (25.4) 1.81 (45.9) 0.89 (22.5) 0.75 (19.1) 1-1/2 1.24 (31.6) 1.31 (33.3) 1-5/16

 

Stainless Steel Union Elbow Application
  • Pneumatic Connections
  • Gas Pipe
  • Chemical Fertilizer Pipe
  • Hydraulic Pipe

 

Manufacturer & supplier of Stainless Steel Union Elbow and 45 Degree Union Elbow in India, Easy installation, Get a Free quote now!

 

Do You know where our Union Elbow are installed ?
Stainless Steel 304 Union Elbow
Stainless Steel 304 Union Elbow
Dana Gas Co. Pjs, UAE
Brass Union Elbow
Brass Union Elbow
Victorian Chemical Company, Australia
90 Degree Union Elbow
90 Degree Union Elbow
Dysim-Chem Limited, Bangladesh

 

90 Degree Union Elbow Installation Step
  • Square-cut tubing should have burrs removed by properly cleaning the tube end.
  • Make sure the tubing fits tightly against the body's shoulder when you insert it into the assembly and that the nut is finger-tight.
  • Tighten the nut with a wrench 1-1/4 turns while holding the body with a different wrench.

 

What Precaution Should Take befor using Union Elbow ?
  • It is not recommended to go beyond the pressure rating of the tubing. Elongation could occur in the tubing, shrinking the wall thickness and cause potential harm.
  • Make sure all fittings are properly installed.
  • Never connect, disconnect or remake a fitting with pressure in the system.
  • Always use proper thread lubricant and sealants on tapered pipe threads.
  • For proper sealing it is recommended that the tubing and fittings be of like material.
  • Never bleed a system by loosening a fitting.